RapidStak Packing Instructions
Thermo Electron Corporation
RapidStak Packing Instructions
1-5
To secure the RapidStak’s moving parts
1. Secure the main arm.
a. Raise the main arm to align the screw holes in the arm with the
holes in the clear cover.
Figure 1-1.
Rear of clear cover and main arm, as seen from the back of
the RapidStak
b. Slide the blue shims into the space between the clear cover and the
main arm, so that the sides of the shims are on either side of the
aligned screw holes.
c. Thread the thumb screws into the main arm through the holes in
the clear cover, and secure the shims in place.
Aligned screw
holes
Clear cover
Shim, located
behind the clear
cover, and in front
of the main arm
Thumb screw
