1
Installation & User Guide
Kitchen Plinth Heater models
KPH 2400C and KPH-2400W
Classic models
Wireless models
Introduction
This heater is intended to install behind the plinth in the space under the kitchen cupboards. However,
it can be installed in similar kind of application.
This unit is made for two pipe pumped central heating systems. Flow and return and pipes should be
connected as per drawing mentioned in page 2.This unit should not be installed in one pipe system.
To allow enough airflow a minimum clearance of 20-25mm from the top of the unit to the any shelving.
This unit must be installed of flat surface to avoid vibration.
Isolating valves (not supplied) should be fitted to both pipes (flow & return) to allow easy servicing.
The flexible hose should be fitted to both pipe (flow & return) to allow easy servicing.
This unit should not be installed in bath room or high humid areas.
Electrical connections should be via 3A fused spur and it should be accessible after the installation.
The following items should be in the carton:
Product complete with pre-wired mains cable.
Flexible connecting Hoses
Fitted Grille
Fixing screws (2) with screw caps
Wireless Thermostat (Models KPH 2400-W Only)
In the event of any items missing or visibly damaged on unpackaging, please contact us on email
before starting any installation.
Installation:
