thermital 20034707, Руководство по установке, эксплуатации, техническому обслуживанию и управлению системой

Страница: 36 / 40

Clean the boiler and remove any carbon deposits from the surfaces of the heat exchanger
at least once a year
. This
not only extends the boiler’s working life, but also keeps it efficient in terms of heat output and consumption.
Proceed as follows to clean the boiler. Open the front
door (1) and pull out the turbulators (2). Use cleaning
rods (3) or other tools of suitable size and shape to clean
inside the tubes. Remove any built-up deposits from the
flue gas box through the access door opening.
b
If you are using fuel oil burners with a smoke scale
reading higher than 3, perform the following actions
every 300 hours of operation.
- Clean the boiler’s heat exchange surfaces.
- Check and clean the turbulators. Replace if worn
or damaged.
2
3
1
THE/TG 3S
90 115 166 217 255 349 448 511 639 850 1160 1450
N. waves 22 22 27 32 38 40 55 55 61 71 71 90 n°
36
ENGLISH
TECHNICAL ASSISTANCE SERVICE
CLEANING THE BOILER