Thermionic Culture The ULTRA Vulture, Руководство по эксплуатации

Страница: 9 / 13


Thermionic Culture Ltd. 2021 8
4 Inputs & Outputs
Inputs and outputs are connected as follows:
Line ins and outs are on XLRs with signal pins 2 & 3. Pin 1
ground.
Low level outs are also TRS jacks with Tip as output. Ring and
Sleeve are grounded so can be used with
“
balanced” cables.
The DI inputs on the front are mono (TS jacks).
NB. The DI
input overrides the Line input.
All jacks are gold plated for best connectivity.
Always use twin screened “balanced” cable when connecting
line inputs and outputs. There should be no problem
whatsoever when connecting line inputs and outputs into
balanced or unbalanced systems.
The ULTRA Vulture is designed to work into equipment with
an input impedance of at least 4k
Ω
. Nearly all equipment
currently sold meets this requirement, though certain units still
have 600 Ohm line inputs. If you plug into one of these there
will be a loss of both level and low bass frequencies.