ThermaWave Gobi, Руководство пользователя

Страница: 7 / 12

7
Setting Up the Unit
1. Unpack the unit by cutting open taped areas at top of the box. Fold back box flaps and gently turn entire box
upside down. Lift box off of styrofoam packed contents. Remove styrofoam, turn upright. We recommend
keeping packing materials for future transport or storage of unit.
2. Find a level and unobstructed location to place heater away from cold walls (outside walls).
3. Plug the POWER CORD into a grounded outlet (120V, 15A or higher).
4. Activate the REMOTE by removing the plastic shipping guard from the battery compartment.
Operating The Unit
Turning the Unit On/Off
• Turn the unit on by pressing the “I” on the POWER TOGGLE (Unit Rear).
• Turn the unit off by pressing the “O” on the POWER TOGGLE (Unit Rear).
• Always unplug the unit when not in use.
Controlling the Heater
Press the POWER CONTROL button to activate the Heater. Set the desired heat level using the
TEMPERATURE CONTROL buttons. The selected heat level is indicated by the lights of the
TEMPERATURE GAUGE.
Selecting a Mode
Select a mode by pressing the MODE CONTROL button until the desired mode is indicated by the MODE
INDICATOR LIGHTS.
• HIGH MODE: To quickly heat an environment, select HIGH MODE using the MODE CONTROL button.
• AUTO MODE: The unit begins in AUTO MODE and heats the room as efficiently as possible
with the set temperature.
• QUIET MODE: If you feel the unit is too loud for your environment, such as when you are sleeping, press
the MODE CONTROL button until it cycles to QUIET MODE. The unit continues to heat according to the
selected heat leavel, but the fan runs on the most silent speed.