Thermasol SEAT-S-GR, Руководство пользователя

Страница: 10 / 12

English
OVERVIEW
Thank you for choosing the ThermaSol in Shower Seat. Please read and
understand the instructions in this manual; keep manual for future
reference. It is your responsibility to see that your Shower Seat is
properly assembled, installed, and cared for. Failure to follow instructions in
this manual could result in serious injury or death. If you are not equipped
to undertake the outlined work, we would recommend that you have your
Shower Seat installed by a qualified contractor.
The Shower Seat is a high quality, commercial grade, fold down shower
seat. The Shower Seat is intended to provide shower seating support for
people with reduced mobility. The Shower Seat is intended to bear weight
ONLY when the seat is in the down position; the seat is not intended to
bear weight in any other position. The Shower Seat is intended to be folded
up when not in use. A friction hinge ensures that the handle will not
inadvertently lower when it is in the up position. The Shower Seat is
installed with appropriate fasteners to a structural wall. The maximum user
weight for this product is 400lbs / 181kgs. Note: Product is not intended to
support full body weight (i.e. do not stand on the seat). The Shower Seat is
not to be used in any other way than described above.
ONE YEAR WARRANTY
Products are covered by a one year warranty from date of purchase against
defects in materials and workmanship for the original purchaser (proof of
purchase must be demonstrated on warranty claims). Limit one warranty
replacement per customer. Warranty excludes normal wear and tear, wood
finishing, surface cracks / scratches that are not structural, the existence of
mold, damages due to misuse, accidental damage, alteration or damage
caused by chemicals / cleaning products. Use recommended cleaning
instructions to prolong the life of your product.
Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft
Products Inc. from and against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including without
limitation consequential damages and reasonable professional fees)
resulting from buyers specification, application, or improper use of goods
described hereon; buyers omission or neglect. HealthCraft Products Inc.
does not assume any liability for damage resulting from services performed
by others or faulty installation, misuse or misapplication of goods sold by
HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for
prospective profits or special, indirect, or consequential damages, or for the
cost of any corrective work done without HealthCraft Products Inc. prior
approval. HealthCraft Products Inc. total liability hereunder shall in no
event exceed the purchase price of the goods specified hereon. Warranty,
specifications, materials and finishes are subject to change without notice.
Updated warranty: www.invisiacollection.com/download/4528/
HealthCraft Products Inc.
2790 Fenton Road
Ottawa, Canada
K1T 3T7
DELIVERY CONTENTS / PARTS FIGURE A.
1. Seat Assembly
2. Top Wall Panel
3. #10 x 3" Wood Screw, S/S (x8)
INSTALLATION WARNINGS FIGURE B.
1. Seat must be installed to walls that are structurally sound.
2. If desired installation location does not have adequate structure, add
wood blocking.
3. CAUTION - Do not install if structure behind walls is unknown.
4. CAUTION - Do not install into metal studs.
5a. CAUTION - Do not install in fiberglass / acrylic shower enclosures with
insufficient stiffness and strength. 5b. Add wood blocking if required.
6. CAUTION - Do not use seat for purposes other than sitting.
7. CAUTION - Do not eat more than 1 person at a time.
8. CAUTION - Gap between wood and wall.
9. CAUTION - Pinch points present when folding seat.
10. CAUTION - Seat and bathtub are slippery when wet.
SUGGESTED SERENA-SEAT LOCATIONS FIGURE C.
To determine the optimal mounting location, we recommend consulting
with an appropriate healthcare professional. If side wall (to faucet) is less
than 36" / 914mm, seat can be mounted on the back wall. If side wall (to
faucet) is greater than 36" / 914mm, seat can be mounted on side wall
(less than 24" / 610mm from faucet wall). ADA recommend seat height
from finished floor 17-19" / 432-483mm.
INSTALLATION FIGURE D.
1. Slide top panel off of frame.
2. Mark the location on the wall of the top hole of the frame (to position the
seat surface at the required height).
3. Drill pilot hole for fastener.
4. Fasten the frame to the wall using appropriate fastener and waterproofing.
5. Use a level to ensure the seat is level and mark location on the wall of top
hole on the frame.
6. Drill pilot hole for fastener.
7. Fasten the frame to the wall using appropriate fastener and waterproofing.
8. Repeat step 6 and 7 for remaining holes (x6)
9. Slide top panel onto frame.
10. Inspect hardware regularly, and tighten if required.
TECHNICAL DATA FIGURE E.
PRODUCT USAGE
See Figure F.
CLEANING INSTRUCTIONS
Weekly cleaning is recommended. Use mild soap and water with a soft cloth
as necessary. Wipe down damp surfaces with dry cloth. Always wipe in the
direction of the wood grain. Do not use abrasive cleaners or commercial
cleaning products. Do not use wire brushes, steel wool or abrasives (pad,
papers, cloths, etc.).
Gate 88
Kanalgatan 45B
Skellefteå, Sweden
93123
A
Seat
18"
457mm C
Hole Spacing
16"
406mm D
Overall Width
20"
508mm Model
WS18
B
Back Rest
18.50"
470mm
10
EC REP
81183_B