Thermaltronics TMT-HA050-2, Руководство пользователя

Страница: 6 / 7

3
TMT-HA050-2 Hot Air Tool
USER MANUAL
UNPACKING/ASSEMBLY/OPERATION
Please read this manual and follow the directions before using the equipment. The carton contains:
1. TMT-HA050-2 Hot Air Tool
2. HTN-D30, HTN-D50, HTN-D80, HTN-D100 nozzles
3. Power Cord
Important: Keep all shipping materials until satisfactory operation has been verified.
Assembly and Operation
1. Remove TMT-HA050-2 Hot Air Tool from its box and place on a suitable work bench.
2. Select the proper nozzle and secure it to the handle.
3. Connect the AC plug to a suitable AC power outlet.
4. Switch the air pump power switch to the “on” position
5. Switch the heater power switch to the "on" position
6. Adjust the air flow and temperature.
7. Wait for the actual temperature to reach the set temperature. The unit should then be ready.
Power Off
1. Increase the air flow to max (99)
2. Decrease the temperature to the lowest setting
3. Wait until the temperature of the heater has cooled down.
4. Switch off the unit, unplug if not used for extended periods of time.
Replacing the Heating Element
Caution: Disconnect power before replacing heater element.
1. Remove the six screws holding the hot air tool together and open the cover.
2. Remove the three screws on the heater PCBA.
3. Disconnect the heater by pressing on the connector lock.
4. Carefully insert a new heating element (HA-HE050-2).
5. Reassemble the hot air gun in the reverse order it was disassembled.
1
3
1
2