EVO_Blue 550W~750W
EVO_Blue 550W~750W
3. Power Connector Introduction
4. Installation Steps
03
04
1. Open your computer case; please refer to the direction in your
case manual.
2. Install the PSU into the case with the four screws provided.
3. Connect the 24 pin Main Power Connector to your
motherboard and peripheral. If your motherboard uses a 20-pin
connector, detach the 4-pin attachment on the 24-pin connector.
4. Connect the 8-pin or 4-pin connector for the CPUs.
5. Connect other peripheral power connectors to devices such as
hard drives, optical drives, etc.
6. Close your computer case and connect the AC power cord to
the power supply AC inlet.
Note: The detachable 4-pin section cannot be used in place of a
4-pin +12V connector.
Note: Make sure that your system is turned off and unplugged.
Disconnect the AC power cord from your old power supply.
MODELS
Connector Type
Connectors & Cable length
20+4pin
ATX 12V 4pin
Molex & FDD
SATA
PCI-E 8pin
1 x 20+4pin Main connector
(650mm)
1 x EPS 12V 8pin connector
(650mm)
3 x Peripheral & 1 x FDD connectors
(500mm + 150mm + 150mm + 150mm)
3 x Periphera connectors
(500mm + 150mm + 150mm)
2 x S-ATA connectors
(500mm + 150mm)
(550W/ 650W)
3 x S-ATA connectors
(500mm + 150mm + 150mm)
(750W)
2 x 6pin PCI-E connectors
(500mm)
1 x 8pin PCI-E connectors
(500mm)
(550W)
Cable
P/N Model
W0306 550W
W0307 650W
1
1
1
4
6
1
1
2
1
1
1
1
4
6
1
2
2
2
20+4pin Main
Connector
4pin +12V CPU
Connector
8pin +12V CPU
Connector
SATA
Connector
Peripheral
Connector
Floppy
Connector
PCI-E (8 to 6)
Connector
6pin PCI-E
Connector
8pin PCI-E
Connector
W0308 750W
1
1
1
6
6
1
2
2
2
ATX 12V 8pin
PCI-E 6pin
PCI-E 8pin to 6pin
adapter
1 x EPS 12V 4pin connector
(650mm)
2 x 8pin PCI-E connectors
(500mm)
(650W/ 750W)
1 x 8pin to 6pin PCI-E connectors
(150mm)
(550W)
2 x 8pin to 6pin PCI-E connectors
(150mm)
(650W/ 750W)
2 x S-ATA connectors
(500mm + 150mm)
(550W/ 650W)
3 x S-ATA connectors
(500mm + 150mm + 150mm)
(750W)
550W
650W
750W
