Thermaltake Armor VH6000 Series, Руководство пользователя

Страница: 11 / 14

VH6000 Series 19/20
On the front of the case, you can find some LEDs and switch leads
(POWER SW*1, POWER LED*1, H.D.D. LED*1, RESET SW*1)
Please consult user manual of your motherboard manufacturer, then
connect these leads to the panel header on the motherboard. These
leads are usually labeled; if not, please trace them back to the case
front to find out their source.
- POWER LED
connects to your M/B at the PLED
- POWER SW
connects to the PWR connector on the motherboard.
- H.D.D LED
connects to the 2-pin labeled HDD LED connector
- RESET SW
connects to the RSW connector on the motherboard
3.2 Case LED connection 3.3 USB 2.0 & IEEE 1394 Firewire Connection
USB connection
Please consult your motherboard manual to find
out the section of "USB connection".
VCC / USB Power (+5C) for Port 4
RED
WHITE -D / USB Negative Signal for Port 4
GREEN +D / USB Positive Signal for Port 4
BLACK GROUND / USB Ground
KEY
VCC / USB Power (+5C) for Port 3
-D / USB Negative Signal for Port 3
+D / USB Positive Signal for Port 3
GROUND / USB Ground
RED
WHITE
GREEN
BLACK
NC
USB Function