Thermal CS011126, Руководство пользователя и техническое руководство

Страница: 17 / 25

1751 Hurd Drive ● Irving, Texas 75038 ● (972) 580-0200 ● (888) 580-0202 ● Fax (972) 580-0277
URL: www.thermal-edge.com ● Email: thermaledgeinfo@thermal-edge.com
SP-ENG-211-000-02 Rev 1.2 17 | P a g e
Field Serviceable Parts
Thermal Edge carefully designs and selects components with the maximum life expectancy. Due to
OEM manufacturing tolerances, poor unit maintenance or extreme operating conditions, components
may fail before their maximum life expectancy. The table below lists parts that are serviceable in the
field by an Air Conditioner Technician.
Part Description Thermal Edge Part #
Digital Controller
52110-1 for 120VAC
52111-1 for 120VAC w/ both Dry C and Heater
Low Pressure Switch 38151-1
Condenser Fan Cut-In Pressure Switch 38006-1
Temperature Probe 52126-2
24VDC Power Supply Board 52312-1
Thermal Expansion Value TXV 32025-1
Compressor 31003-1 for 120VAC
Compressor Thermal Overload 31003-2 for 120VAC
Gasket Installation Kit 71410-CS01
Evaporator Fan 41002-1-1 for 120VAC
Condenser Fan 41002-1-1 for 120VAC (Note: Qty 2)
Electrical Harness 51006-1002
Power Cord 55000-1
Capacitor 54056-1 for 120VAC
Safety Information
Unit is carefully designed to restrict access to movable parts to minimize any potential injury. This Air
Conditioner has been tested by UL to meet the safety requirements of the UL484 specification. When
working with the Thermal Edge Air Conditioner always makes sure shroud is installed. Verify proper
voltage is applied to unit as specified in the UL label of the Air Conditioner. In the event of a field
service repair, power down unit using the power on/off switch and disconnect power from unit. It is
always recommended to use a licensed Air Conditioner Technician for internal diagnostics and repairs
issues.
Contact Thermal Edge technical support for further details on opening the unit and troubleshooting
tips.