6
OPERATING INSTRUCTIONS
1. Start and select working mode
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the supplied
remote control.
Once power is off heating element will stop working at first.
Fan will prolong working for 3 min to emit plenty of heat
inside. This mark will indicate running during the 3 min.
Or
Select a heat setting.
Press the MODE button to toggle between the three heat
settings.
Power for High mode is 1500W; and Low is 1000W. ECO
mode is an Economic Energy Saving Function. When ECO
mode is chosen, the heater will set the temperature
automatically to 68°F
（
20° C) under this mode
2. Setting room temperature
Or
Or
Or
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Or
Set temperature indication varies from 59°F to 86°F
，
or from
15°C to 30°C. Once you have chosen the desired temperature,
the heater will remain on until the room temperature increases
to the temperature on the digital display. The heater will cycle
on and off to maintain the desired room temperature.
Or
Press °C/°F button, then digital display will indicate Fahrenheit
value or Celsius value.
When Fahrenheit indicating light is on, digital display indicates
Fahrenheit value;
When Celsius indicating light is on, digital display indicates
Celsius value.
3. Setting timer-power-off
