4
www.thermaltronics.com support email: [email protected]
UNPACKING/ASSEMBLY/OPERATION
Please read this manual and follow the directions before using the equipment.
The carton contains:
1. Instruction manual
2. TMT-2000PS power supply
3. Soldering handpiece holder, including Brass curls and sponge
4. Soldering handpiece
5. RMP-1 Tip removal pad
6. CC-1 Connection Cable
Important: Keep all shipping materials until satisfactory operation has been
verified.
Assembly and Operation
1. Remove TMT-2000PS power supply base from its box and place on a suitable work
bench equipped with AC power.
2. Remove the work stand from its box. The unit should include a brass tip cleaning
curl and a rectangular sulphide free sponge.
3. Remove the handpiece from its box and place into iron holder.
4. Plug the handpiece cord into the front connector.
5. Plug tip cartridge into handpiece
6. Connect CC-1 Connection Cable
Connect
7. Moisten the sponge with DE-Ionized water.
8. Connect the AC plug to a suitable AC power outlet.
9. Switch the power switch to the “on” position
10. Allow a few seconds for tip cartridge to reach soldering temperature.
11. The unit should then be ready to use.
Temperature Calibration
Thermaltronics “Curie Heat Technology” systems do not require temperature
calibration. The technology is very precise and is self regulating. The alloy used in the
construction of the tip cartridge will maintain the set temperature for its entire life.
Содержание TMT-2000PS
Страница 1: ...USER MANUAL TMT 2000S SOLDERING SYSTEM www thermaltronics com...
Страница 2: ......
