THERMAL INTEGRATION DATA Extra HIU, Руководство по установке

Страница: 39 / 42

The DATA Extra HIU, Installation Instructions DE2, 12th August 2021
Troubleshooting for End users
What can you do?
Always take in account the safety of yourself and others when performing a troubleshoot.
Leakage
1. Close all valves on the plumbing bracket under the unit and the mains cold water feed.
2. Contact your engineer.
Central Heating Circuit does not warm up
1. Make sure the power cord is plugged in and turned on. If in doubt contact an electrician.
2. Make sure the valves on the plumbing bracket are open (handle in vertical position).
3. Check radiator valves are open and calling for heat.
4. Check the programmer is set to ON, and calling for heat.
5. Set the room thermostat higher.
6. Problem solved? If not, contact your engineer.
No domestic hot water
1. Check that the mains cold water valve is open. If not, open the main valve.
2. Problem solved? If not, contact your engineer.
Tap water does not warm up
1. Ensure that all valves on the plumbing bracket under the unit and the main valve are open.
2. Make sure the power cord is plugged in and turned on. If in doubt contact an electrician.
3. Problem solved? If not, contact your engineer.
Sound
NOTE: It is normal that the HIU makes noise when hot water or heating are active. Also, the electronic valves will make a light
(buzzing) noise during movement. If the HIU starts to make any loud or disturbing noises, contact your installer.
Page 39