![Thermador SM272B Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/thermador/sm272b/sm272b_care-and-use-manual_1102143009.webp)
SM/SMW Oven Care and Use Manual
Convection Oven Functions
What You Will Hear And See
What You Will Hear
Convection Fan:
Operates during any convection
mode. It turns off if the door is opened.
Component Cooling Fan:
Activates during any cook-
ing or self-cleaning mode to cool electronic compo-
nents and outer door surfaces. It will stay on until
components have cooled sufficiently, even after the
oven is off. This air is exhausted through the vent
located below the lower oven.
Oven Audible Signals: Beeps & Chimes
1.
Pad Touch Response:
A single, short beep
whenever a function or number is pressed.
2.
Invalid Entry:
Three short beeps.
3.
Self-Clean is Selected and Door is Not Closed:
Four short beeps.
4.
Indicates a Failure:
Continuous series of long
beeps.
5.
Preheat tone:
Single non-repeating chime.
6.
One minute left on timer:
Single non-repeating
chime.
7.
Timer Has Counted Down To Zero:
Four chimes,
one second apart followed by two chimes, one
second apart every 30 seconds, up to 5 minutes.
8.
End of Timed Cooking Cycle:
Four chimes, one
second apart followed by one chime every 60
seconds, up to 10 minutes.
What You Will See
Control Panel Flashing:
Any flashing in the control
window indicates the selected function is not com-
pletely programmed and requires another step.
Power-up Flashing:
The clock time flashes following
the initial application of power to the unit or after a
power failure.
Illuminated Number:
These numbers indicate time of
day, time to cook, timers, or temperature. Digits will
move to the left as new digits are entered. Tempera-
tures in Fahrenheit will adjust to the nearest 5
°
F.
Illuminated Lock:
When the word "LOCK" is dis-
played, the door will not open. Wait for the word to
disappear, indicating the automatic door latch is in the
open position.
Err:
Flashes if invalid oven temperatures or times are
entered.
F Numbers:
Various error codes of F1 to F9, FC, FF, F-
and Fr may appear if there is a problem; please consult
"Solving Operational Problems," Page 35.
C:
Will appear if Centigrade format is selected, see
Page 31.
1
and
2
: Indicate Timer 1 and Timer 2.
CONTROL PANEL DISPLAY WINDOW
TIMER
DELAY
STOP
COOK
START
TIMED
1 2
0VEN
U L
CLEAN
LOCK
CONVECT
PREHEAT
ROAST
BAKE
BROIL
4 4 5
:
HR
3 5 0
°
c
U L
ON
ON
Page 7
1 2