Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
58300000154022_ARA_EN_D
Page 51 of 68
Figure 93: Rear Cover Shield Screws
Figure 94: Rear Cover Shield / Motor Assembly (Back Side View)
11. Remove and retain the three T-20 screws from the rear cover
shield (Figure 95 and Figure 96, page33), then remove the rear
cover shield from the bracket and fiberglass insulation
(see Figure 97, page 52).
Figure 95: Removing Shim Ring
Figure 96: Screws Attaching Rear Cover Shield to Motor Bracket
12. Wearing gloves, remove and retain the fiberglass insulation, and
then remove and retain the three T-20 screws securing the
bracket onto the motor (see Figure 98).