PAGE 9
REPLACING THE BULBS
4.
Re-insert the bulb ring.
5.
Restore the power by inserting the mains plug or
switching on the fuse.
Note:
If the light does not function, check that the bulbs
have been inserted correctly.
CAUTION. Avoid risk of electric shock.
1.
Switch off the hood and pull out the mains plug or
switch off the electricity supply at the fuse box.
CAUTION. Avoid risk of burns.
Halogen bulbs become very hot and remain hot for some
time after being switched off.
2.
Remove the bulb ring with a screwdriver or similar tool.
3.
Replace the halogen light bulb (conventional halogen
bulb, 12 Volt, max. 20 Watt, G4 bulbholder).
IMPORTANT: Plug-in bulbholder.
Take hold of the bulb with a clean cloth.
Finger prints can shorten bulb life.
