Page. 6
Advanced Planning
Before You Begin
CAUTION
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being
turned ON accidentally.
Parts included
•
Metal transition with backdraft damper
•
Stainless steel baffle filters
•
Stainless steel grease trays
•
Stainless steel filter spacers
•
Support frame
•
Telescopic flue
•
Blower adapter
•
Fastener assortment*
* Hardware provided is for mounting through standard
thickness drywall or plaster into wood studs. Installers are
responsible to provide hardware for other types of
mounting situations.
Tools and parts needed
•
Blower (refer to the
Ventilation Planning Guide
for
compatible blowers)
•
Ducting as needed (refer to
Equivalent Duct Lengths
for Commonly Used Transitions
table)
•
Aluminum tape (
DO NOT use duct tape
.)
•
1/2'' (13 mm) conduit if required (follow local codes)
•
1'' (25.4 mm) Strain relief
•
Phillips screwdriver
•
T-20 Torx head screwdriver
•
11/32'' nut driver or socket and ratchet
•
Drill with 3/16'' and 1¼'' drill bits
•
Wire stripper
•
Tape measure
•
Protective work gloves
IMPORTANT: DO NOT
throw away any packaging until
appliance is fully installed.
Optional accessories available for
separate purchase.
Refer to www.thermador.com for more details.
•
REMCPW – Built-in Remote Control Accessory
•
EXTNCB25W – 25 ft. Remote and In-line Blower
Extension Cable
•
WC8 - 8'' Wall Cap
•
WC10 - 10'' Wall Cap
•
RFPLT600P - Roof plate for use with 600 CFM Remote
Blower VTR630
•
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030 and 1300 CFM Blower VTR1330
General Information
Overall Dimensions
HPINxxWS
This model series is 27'' (686 mm) in depth and features
brushed stainless-steel canopy, telescopic chimney flue,
with LED lights.
NOTE:
Transition is centered horizontally.
IMPORTANT:
The hood needs to be centered over the
cooking surface for best performance.
53
(1,370)
"
15/16
41
(1,065)
"
15/16
27"
(686)
5¼" (133)
24¾" (629) –
36¾" (933)
inches (mm)
