Thermador DWHD94BBS, Инструкция по уходу и эксплуатации

Страница: 13 / 28

11
Selecting Dishwasher Options
The factory default settings for all options should
provide good results.
Options Selections
You can access the available options in the
Options Step Down Menu as follows:
Delay Start
This option allows you to delay the start of the
selected cycle for up to 24 hours in 30 minute
increments.
NOTE: In the Options Step Down Menu you can
return to the main menu at any time by pressing
the START button.
1. Open the dishwasher door far enough to
expose the control panel.
2. Press the ON/OFF button.
3. Press the MENU/OK button once to display
the Delay Start option.
4. Press the + or – button until the display
shows the desired amount of delay time.
5. After selecting the desired amount of delay
time, you must press the MENU/OK button
to save the setting. The display will indicate
“Value Stored” and return to the main menu.
If you did not select a delay time, press the
START button to return to the main menu.
6. Select the desired wash cycle by pressing
the – or + buttons.
7. Close the door. When the time delay has
elapsed, the dishwasher will start
automatically and continue operating through
the end of the selected cycle.
8. You can change the time delay and/or the
wash cycle at any time during the delay.
PowerBoost
Reduces the time to complete the wash cycle by
preheating.
NOTE: In the Options Step Down Menu, you can
return to the main menu at any time by pressing
the START button.
1. Open the dishwasher door far enough to
expose the control panel.
2. Press the ON/OFF button.
3. Press the MENU/OK button twice to display
the PowerBoost option.
Operating the Dishwasher
(continued)
4. This option can be turned on or off by
pressing the + button.
5. After selecting the + button to turn on
PowerBoost, you must press the MENU/OK
button to save the setting. The display will
show “Value Stored” and return to the main
menu. If you did not select the + button to
change the current setting,
press the START button to return to the
main menu.
6. You can now select the desired wash cycle
by pressing the – or + buttons.
7. Press START and close the dishwasher
door to begin the cycle.
Extra Drying
This option allows you to adjust the final rinse
temperature to improve drying or to save energy.
NOTE: In the Options Step Down Menu you can
return to the main menu at any time by pressing
the START button
1. Open the dishwasher door far enough to
expose the control panel.
2. Press the ON/OFF button.
3. Press the MENU/OK button three times to
obtain the current drying program
4. Press the + or – buttons to step through the
following options:
· Economy Drying – saves energy.
· Normal Drying – factory default setting.
· Extra Drying – improves the drying
performance.
5. After selecting the desired drying option, you
must press the MENU/OK button to save the
setting. The display will show “Value Stored”
and return to the main menu. If you did not
select a different drying option, press the
START button to return to the main menu.
6. Select the desired wash cycle by pressing
the – or + buttons.
7. Press START and close the dishwasher
door to begin the cycle.