Thermador CIT304TB, Инструкция по использованию и уходу

Страница: 14 / 72

14
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
‹
appears in
the element display and the timer display shows
‹‹
for
10 seconds. The
x
indicator in the element display
stays on.
Touch the
TIMER
key, to turn the indicators and the beep
off.
Notes
▯
To set a cooking time of under 10 minutes, always
touch
0
before you select the required value.
▯
If a cooking time was set for several elements, the time
information for the selected element is shown in the
timer display.
▯
Select the relevant element to call up the remaining
cooking time.
▯
You can set a cooking time of up to
ŠŠ
minutes.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note:
The cook time can be changed or cancelled for
any element:
Select the desired element. Touch the
TIMER
key. Adjust
the cook time using the number keys, or deactivate it by
setting the timer value to
‹
.
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
1.
Touch the
TIMER
key until the
V
indicator lights up.
‹‹
appears on the timer display.
2.
Set the desired time using the number keys.
min
appears on the timer display.
The timer start to count down after a few seconds.
Changing or deleting the time
Touch the
TIMER
key repeatedly until the
V
indicator
lights up.
Change the time using number keys, or set
‹‹
in order
to delete the programmed time.
When the time has elapsed
A beep sounds.
‹‹
appears on the timer display and the
V
indicator lights up. The displays go out after
10 seconds.
Touch any key to turn off the indicators and the beep.
Panel lock
You can use the panel lock to prevent children from
accidentally turning the cooktop on.
Turning the panel lock on
The cooktop must be turned off.
Touch
LOCK
for 4 seconds. The
Ú
indicator lights up for
several seconds. The cooktop is now locked.
Turning the panel lock off
Touch
LOCK
for 4 seconds. The cooktop is now
unlocked.
9
CAUTION
The panel lock may be accidentally turned on and
off due to:
▯
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the
LOCK
touch key.
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
Wipe Protection
Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate:
Touch the
LOCK
key. The
Ú
indicator above the key
lights up. The control panel is locked for 35 seconds.
You can now clean the surface of the control panel
without risk of changing the settings.
To deactivate:
To deactivate the function before the time has elapsed,
touch the
LOCK
key. The
Ú indicator above the key turns
off, the function is deactivated.
Notes
▯
An acoustic signal sounds 30 seconds after activation.
This indicates that the function is about to finish.
▯
The wipe protection lock does not lock the main
switch. The cooktop can be switched off at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
”‰
and the residual heat
indicator • / œ flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).