Thermador An American Icon PH30ZS, Руководство по обслуживанию, Страница: 10 / 16

PHZ Service Manual
PAGE 8
Operating Instructions
The blower should be turned on for about 5 minutes
before cooking in order to establish air currents
upward through the hood. Thus when heat, smoke,
moisture, grease and cooking odors are produced,
they will be carried outside instead of drifting into
Hood Operating Instructions
other rooms. Use the low speeds for normal use
and the higher speeds for strong odors or fumes.
Drafts across the range or cooktop will reduce the
effectiveness of the hood. Such drafts should be
prevented when possible.
1
2
3
OFF BUTTON – Pressing button once turns
ventilator off and resets control.
FAN SPEED BUTTON – Pressing button once,
from an off state, turns the ventilator on low.
Each successive press of the button increases
the fan speed until high where the fan cycles
back to the low speed.
• The LEDs above this button indicate the
current fan speed. When the fan is on, the
corresponding LED is illuminated.
1 – Low
2 – Medium
3 – High
DELAY SHUT OFF BUTTON –
• Press to turn fan on high for 10 minutes.
If the ventilator is off when the delay button is
pressed, the ventilator will turn on to the high
speed setting for 10 minutes. At the end of the
cycle the ventilator will turn off.
If the ventilator is on when the delay button is
pressed, the ventilator runs for 10 minutes at
the current speed then turns off.
• During a timed period, the LED above the
Delay Shut Off button is illuminated.
4
5
6
• To interrupt a timed period, press Fan Speed
or Off button.
CLEAN FILTER REMINDER – After 40 hours
of operation the clean filter reminder LED above
this button will illuminate indicating that the
filters need to be cleaned. Pressing this button
for 3 seconds resets the 40-hour period and
turns the LED off.
LIGHT On/Dim/Off – This button controls the
halogen lighting. The first press turns the lights
on. A second press dims the lights. A third
press turns the lights off.
HEAT LAMP BUTTONS – The buttons marked
“L” and “R” independently control the left and
right infrared heating lamps, turning the lights
on or off.
®
OFF
FAN
SPEED
DELAY
SHUT OFF
FILTER
LIGHT HEAT LAMPS
L
R
1 2 3
2 3 4 5 6 1
CONTROL PANEL