2
www.UsePhoenix.com • [email protected]
Toll-Free 1-800-533-7533
Table of Contents
Introduction
...............................................................1
1. Safety Information
................................................2
2. Specifications
.......................................................2
3. Operation
............................................................2
3.1 Transporting ...................................................2
3.2 Electrical Requirements ..................................3
3.3 Condensate Removal ......................................3
3.4 Ducting ..........................................................3
3.5 Defrost Cycle .................................................3
3.6 Power Button .................................................3
3.7 Purge Button ..................................................3
3.8 Hour Meter ....................................................3
3.9 Hours Button .................................................4
3.10 Defrost Light ................................................4
3.11 Bypass Control .............................................4
4. Maintenance
........................................................4
4.1 Air Filter .........................................................4
4.2 Storage and Freeze Protection ..........................4
5. Service
................................................................4
5.1 Technical Description ......................................4
5.2 Troubleshooting ..............................................5
5.3 Air Mover .......................................................6
5.4 Thermistor .....................................................6
5.5 Condensate Pump ..........................................6
5.6 Float Safety Switch .........................................6
6. Options & Accessories
..........................................7
7. Wiring Diagram
....................................................7
8. Service Parts
.......................................................8
9. Warranty
..............................................................9
• Never operate the unit in standing water, as this may
create a risk of injury from electrical shock. Do not
store outdoors.
• Do not obstruct the air intake and exhaust. Maintain a
.3 m (1 ft) clearance around the air intake and exhaust.
• KEEP CHILDREN AWAY. Do not allow children to play
with or around the unit, it may result in injury. When the
unit is unattended make sure the unit is inaccessible to
children.
2 Specifications
Part No.
4028250
Power
3.7 amps, 230 VAC, Grounded
Water
55 liters/day @ AHAM (26.7ºC, 60%)
Removal
83 liters/day maximum @ saturation
Blower
442 m /hr without external ducting
Refrigerant
.74 kg, R410a
Charge
Operating
1°C to 40°C
Range
Filters:
30cm x 30cm x 2.5cm
Pleated Media MERV-11
Duct
Intake – 30cm Flex-Duct
Options
Outlet – 25cm Lay-Flat
Warranty
Five years;
1st year 100% of Parts and Labor
2nd-5th year 100% of sealed refrigeration
system parts.
Dimensions
Width
51cm,
Depth
51cm,
Height
85cm
Weight
47kg
U.S. Patent - 7,246,503
3 Operation
Place dehumidifier inside structure,
place condensate hose into a drain, or
a large water tight container, and turn
on. To decrease drying times, make sure
all windows and doors are closed to the
outside and seal off the affected wet
areas from unaffected areas.
Optimum performance will be observed
between the temperatures of 21°C and
35°C.
3.1 Transporting
The Phoenix R200 50Hz features a high impact roto-
molded housing with 30cm recessed wheels and a
telescoping handle. The rugged roto-molded housing
protects the dehumidifier from damage. The 30cm wheels
provide greater maneuverability and roll over obstacles
Read the operation and maintenance instructions
carefully before using this unit. Proper adherence to
these instructions is essential to obtain maximum
benefit from your Phoenix R200 50Hz dehumidifier.
Figure 1: Stacked
R200 50Hz
3
1 Safety Information
• Always operate the unit INDOORS ONLY.
• Always operate the unit with a GROUNDED PLUG and a
GROUNDED ELECTRICAL OUTLET. A grounded plug is a
safety feature that reduces the risk of shock or fire.
• Use of a GROUND FAULT INTERRUPTER outlet reduces
the risk of shock or fire.
• Never operate a unit with a damaged power cord. If
the power cord is damaged it must be replaced with a
cord of the same type, amperage rating, and have the
appropriate country specific grounded plug.
• Extension cords must be grounded and able to deliver
the appropriate voltage.
• Always operate the unit on a stable and level surface.
Do not use the unit as a bench or table.
