therM TH01TS, Руководство пользователя

Страница: 4 / 12

All these settings should be programmed with Thermostat Power On
1) Time Setting and Day of Week
2) Programming the number of Days
3) Setting Temperatures and Time Settings
Press key once to change to the correct time using or to adjust the hour. Then
press again to change the minute then finally again to change the day of the week.
Hold for 5 seconds screen will display looP
Or press again, and the screen will display “ 1 2 3 4 5 6 ” Mon to Sat (allowing just
Sunday to be set differently)
Or press again, and the screen will display “ 1 2 3 4 5 6 ,7 ” Mon to Sun (to set all
days the same).
Press Screen will display“12345” Mon to Fri (this will allow you to set the weekend
with different temperatures than the week);
The instructions above brings you to Event 1 - Press or to adjust temperature
Once the days are set tap once to go straight into your temperature and time
settings
Press to set scheduled time, press or to adjust hour.
SETTING AUTOMATIC HEATING CONTROL
The press to change minute again using or . Press to move to the next event
Follow in same manner above until you have set all the Events 1-6 as required for
your programmed days
Please Note: Once your auto heat settings have been set there may be times when you want to
manually adjust your temperature settings for a short interval using or . Hand will temporally
flash if you have altered your auto heat settings but once the next scheduled heat setting starts it
will return back to auto control settings (no hand). To constantly override your auto temperatures
tap once (hand constant). To revert back to auto heat setting, tap (no hand)