11
Turning the device off: Press and hold (approx. 3
sec.) the control button "-"
(until the status display
turns off) to turn off the
PowerPack Basic.
Note:
If the PowerPack Basic is not used for 24 hours, it
will turn off automatically.
Setting the heat level:
The control buttons on the PowerPacks Basic allow
for 3 different levels of heating.
Each time the control button “+” button is pressed
(for approx. 1 second), the heat level is increased;
with the “–“ button, you can lower the heat level.
The LEDs on the control display show the current
heat level (1 LED = low heat, 3 LEDs = high heat).
HEATING POWER
Level
Max. temperature*
(°C / °F)
Heating period per
battery charge
1
37°C / 99°F
depending on the
battery selection
2
45°C / 113°F
depending on the
battery selection
3
70°C / 158°F
depending on the
battery selection
* Measured directly on the heating element under
laboratory conditions
For optimum heat output, Therm-ic recommend the
following batteries or battery pack types.
Alkaline batteries, AA, 1.5 V
NiMH battery, AA, 1.2 V (rechargeable)
If other types of batteries are used, the heat
produced may not be sufficient for use in very cold
temperatures. When purchasing rechargeable
