THERAFIN CORPORATION
Phone 800-843-7234 Fax 888-479-1515
ADJUSTING THE SQUEEZE MACHINE
Air Pressure & Air Flow
To change the
PRESSURE
of the side pad’s squeeze, adjust the air pressure.
To change the
SPEED
of the side pad’s squeeze, adjust the air flow.
page 3
Turn on air compressor (lever to “auto” position).
Unlock the metal box to get to the air controls.
In most cases, the machine is shipped with
the air hose hooked to the compressor. If
not, cut an inch off the end of air hose to
get a good seal (left picture). Firmly push
air hose into red fitting on the 90
0
elbow
(right picture). Slightly pull on hose to
make sure it is properly seated in fitting.
Note: The elbow is designed to spin around.
Air Hose Elbow
Metal Box
OFF
AUTO
Air Pressure
Pull black knob up until it clicks. Turn the knob to adjust pressure.
Push knob down to lock in position.
Watch the dial, and adjust while air compressor is on. To decrease the
pressure the side pads apply to the user, turn knob counter clockwise.
To increase pressure, turn knob clockwise.
Air Flow
Loosen round nut directly under silver knob. Turn the knob to adjust
pressure. Tighten round nut to lock knob in place.
Adjust while air compressor is on. To slow down the speed of the side
pads (how fast they close and open), turn knob clockwise.
To make the side pads move quicker, turn knob counter clockwise.
Black Knob
Dial
Silver
Knob
