TherAdapt
Adult Angle/Straddle Bench (AASB-500) Instructions
Packing List:
(1)
Bench top component with suede Naugahyde
®
padding
(2)
Rectangular side pieces with
(4)
¼ -20 counter-sunk bolts each
(2)
Curved rectangular floor pieces
(2)
Curved rocker bottom pieces
(8)
Thru-knobs with ¼ -20 threaded inserts
(8)
Nylon washers
1. Attach the curved, rectangular floor pieces.
Remove the (4) lower thru-knobs, attach floor pieces, and
replace thru-knobs.
Tighten knobs securely.
2. Adjust the height.
To adjust the height, we recommend standing the bench on
one end, and removing the pair of knobs on the inner surface
of the upper rectangular sidepiece. The combined height and
angle adjustable pieces can be lifted off and the appropriate
height determined by putting bolts through one of the four
pairs of holes drilled in the sides.
3. Adjust the angle.
The outermost, curved, rectangular sidepieces determine the
angle setting. Remove the outer pair of knobs and lift off the
angle piece.
Note:
This piece must be lifted off completely to
make adjustments. The bench angles from a horizontal setting
using the bottom hole to a 10
°
, 15
°
, 20
°
, 25
°
, or 30
°
angle
using the five ascending holes.
4. Convert the angle bench to a straddle bench.
Remove the curved pieces from their storage position
under the bench top. Remove the curved-rectangular
pieces and replace with the rocker bottoms. Adjust
the height as above.
Tighten all knobs securely before using.
TherAdapt
®
Adult Angle Straddle Bench Instructions: Page 1 of 1
