Please read these instructions thoroughly before use. Failure to follow instructions may
result in equipment damage or failure, losses, injury or death.
WARNING:
• Use in winter will cause damage to the poles and nets, voiding the warranty.
The Pond Guy® is not responsible for equipment damage or failure, losses, injury or death resulting from
failure to follow safety precautions, misuse or abuse of equipment.
Package Contents
PONDSHELTER
™
:
PondShelter
™
A
B
C
D
MODEL
MESH
DIMENSIONS
POND SIZES
ALUMINUM
FRAME SIZE
STAKES
TIE-DOWN
LENGTH
PondShelter
™
20’ L x 20’ W
4’x6’ - 16’ x 11’
4’-10’
(30) 61/2”
10’
A
B
C
D
ASSEMBLY INSTRUCTIONS
PONDSHELTER
™
:
See video instructions of the PondShelter™ net online @
www.thepondguy.com/pondshelter
Unpack the Contents
Unpack net and frame assembly,
stakes, and tie-downs. Inspect and
count contents for accuracy.
Prepare the Legs
Unroll netting from around the
aluminum frame. Slide the netting
completely up each leg until
bottom grips are exposed. When
finished, stand net up to look like
a tent and prep for installation.
Adjust the Netting
Pull netting down over the frame
and fit along the perimeter of the
pond. Pull the drawstring at the
base of the net to form a tight fit.
The drawstring can be held in place
with a stake to prevent loosening.
Position Frame Over Pond
Fit frame over pond and adjust legs
to the corresponding landscape.
Turn legs counter-clockwise to
unlock and adjust. When finished,
twist clockwise to lock in place.
Once legs are properly positioned,
stake in place via the nylon
anchoring loop attached to the
bottom grips.
Secure the Netting
Place stakes through the reinforced
band at the base of the netting
to hold in place. A 3’ “skirt” of
additional netting extends past the
reinforcement to fill exposed gaps
in landscape.
Clip-on the Tie Downs
Clip tie-downs to the center of
each span of netting. Pull tie-
downs tight and stake down to
eliminate any net sag.
thepondguy.com | 866-POND-HELP (766-3435)
15425 Chets Way | Armada, MI 48005
2
3
