background image

View other great products on-line at www.thepondguy.com

MagFlo Pumps carry a 5-year warranty. The Pond Guy 

will repair or replace any unit found to be defective. This 

limited warranty is extended exclusively to the original 

purchaser and begins from the date of original purchase 

receipt. Abuse or misuse of this product or power cord 

alterations void all warranty. Impeller and filter sponge 

are wear items and are not covered by this warranty. 

Please call for a RMA number prior to returning product 

by calling our Customer Care Department at 866-766-

3435. Failure to request an RMA number may result in 

delay or dismissal of your warranty claim.

 THANK YOU FOR CHOOSING:

The Pond Guy

®

 Inc .

We Know Ponds

15425 Chets Way

Armada, MI 48005

866-POND-HELP (766-3435)

thepondguy.com

V1

MAGFLO

PUMP MODEL

REPLACEMENT 

IMPELLER

REPLACEMENT

FILTER SPONGE

REPLACEMENT FOUNTAIN KIT

MagFlo 290

#120939

#120948

#120956

MODEL

VOLTAGE

WATTAGE

CORD GPH @ 3’ HEAD MAX HEAD DISCHARGE

INLET

FITTING

MagFlo 290

120V / 60 Hz

17 Watts

20’

197 GPH

6.5’

½” 

½” 

½” & ¾”

Pump does not turn on:

• Check that the power cord is connected. 
• Check to see if the GFCI or main circuit breaker is tripped. 
• Check to see if GFCI is faulty.
• Check power cord for damage.

Pump turns on and then shuts off:

• Verify pump is completely submerged for proper cooling.
• Check for debris clogging the pump intake.
• If using an extension cord, verify that it is of the proper rating for the pump’s electrical 

requirements. 

Reduced water flow:

• Check for debris clogging the pump pre-filter. 
• Perform maintenance cleaning of the pump.
• Verify that water level is sufficient and pump is completely submerged.
• Check plumbing for clogs. 

MAINTAINING YOUR

 

MAGFLO PUMP CONT:

Содержание MagFlo Series









Отзывы: