background image

7

2

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

•  Inspect before use for any damage to the unit. Any damage or missing parts should be

reported immediately before attempting use.

•  Always unplug power from pumps or other electrical devices BEFORE putting hands in

water, or if service and maintenance is

being performed.

•  Always use properly grounded electrical

equipment and a drip loop on any power

cords to prevent water from travelling

along the cord and into the outlet.

•  Do not lift or move the ClearSpring™

Mini using the plumbing.

•  The ClearSpring™ Mini is intended for

use with fresh water only. Do not use

flammable materials.

Failure to follow these instructions and 

warnings may lead to product damage  

or personal injury of which The Pond Guy® or any associated party will not be held liable.

SAVE THESE INSTRUCTIONS

POND HEALTH TIP BEFORE INSTALLATION

•  For best results, functional ponds (ponds with plants & fish) should not be exposed

to full sun and should have sufficient plant cover to promote a balanced environment.

•  Overfeeding fish is the number one contributor to pond balance problems and

should be avoided.

•  If the pond is in an area close to falling leaves or debris, a cover net should be used.

ClearSpring

™ 

Mini                                      

                                                     

Waterfall Filter 

Installation & Maintenance Instructions

Partially Buried

ClearSpring™ Mini

Plug

Buried 

Tubing

Pond

Elevated mound

of soil, sand

and rock

Bio Balls

Blue Coarse 

Filters

Black Fine Filters

NOTES:

__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________

Содержание clearspring mini 110572









Отзывы: