RES-XR4-3U Installation Manual
Version 1.3
2-12
Themis Computer
2.1.3.1 Installing Cards
Perform the following steps to install a PCI card:
1.
Loosen the captive knurled screw on the PCI card clamp (see
A
).
2.
Swing the PCI card clamp away from the top of the chassis, exposing the tops
of the PCI card I/O panels (see
B
).
3.
Locate the empty slot within which a card will be installed (see
Figures
).
4.
Install the new card, making sure the I/O panel is aligned with the chassis
opening.
5.
Repeat Step 3 and Step 4 until all additional cards have been installed.
6.
Swing the PCI card clamp back to its position over the PCI card I/O panels
and tighten the captive knurled screw on the PCI card clamp.
7.
Attach any internal I/O cables to the installed PCI cards, and carefully fold
and tuck any exposed ribbon cables into the cabinet.
8.
If you have no further installations to perform, close the RES-XR4-3U chassis
by refastening the top cover removed in Section 2.1.1, “Remove Protective
Top Cover,” on page 2-1.
Figure 2-9.
PCI Card Clamp
Captive knurled screw
PCI card clamp
B
A
Loosen the captive knurled screw…
… and swing the PCI card clamp upward.
PCI card I/O panels (7 total)
Содержание RES-XR4-3U
