Themis RES-32XEL, Руководство по установке

Страница: 36 / 52

RES-32XEL Installation Guide
2-12
Themis Computer
2.1.7 Power Supply
Each 460-watt load-sharing (N+1 redundant) power supply can be hot-swapped
while the system is still on and operational.
2.1.7.1 Removal
1. To remove a power supply, first hook your right index finger into the extrac-
tion handle and pull the locking lever to the right with the right thumb (see
Figure 2-9 ), freeing the power supply from being held within the chassis.
2. Pull the power supply until it is free of the chassis.
2.1.7.2 Installation
3. Insert the replacement power supply into an empty slot with the extraction
handle facing to the right (see
Figure 2-9 ).
4. Push the power supply carefully into its slot until it is firmly seated (a click
will be heard when the locking lever is securely fastened to the chassis.
Caution: When pulling the power supply from the chassis, hold it at the bot-
tom to prevent it from falling and damaging the unit.
Figure 2-9.
The RES-32XEL Power Supply Locking Mechanism
Locking Lever
Extraction Handle