Themis RES-22XR3, Руководство по установке

Страница: 81 / 162

3-11
Themis Computer
3—BIOS Setup Utility
Advanced Setup Configurations
3.3.3.5 Memory Mode
The options are Independent (default), Channel Mirror, Lockstep, and Sparing.
• Independent - All DIMMs are available to the operating system.
• Channel Mirror - The motherboard maintains two identical copies of all data
stored in channel 1 and 2 memory for redundancy.
• Lockstep - The motherboard uses two areas of memory to run the same set of
operations in parallel.
3.3.3.6 Demand Scrubbing
A memory error-correction scheme where the Processor writes corrected data back
into the memory block from where it was read by the Processor. The options are
Enabled and
Disabled (default).
3.3.3.7 Patrol Scrubbing
A memory error-correction scheme that works in the background looking for and
correcting resident errors. The options are
Enabled (default) and Disabled.
3.3.3.8 Channel Interleave
This feature allows the user to configure the Memory Interleave setting for an
onboard memory channel. The options are 1-way, 2-way, 3-way, 4-way, and
6-way
(default).
3.3.3.9 Bank Interleave
This feature allows the user to configure the Memory Interleave setting for an
onboard memory bank. The options are 1-way, 2-way, and
4-way (default).
3.3.3.10 Throttling - Closed Loop
Throttling improves reliability and reduces power in the processor by automatic
voltage control during processor idle states. Available options are Disabled
and
Enabled (default).