Water outlet
The water outlet may not be reduced. A 40 mm PVC pipe should be
presses into the tank union. From here a PVC pipe can be directed to the
filter sump or pond. The pipe should not be glued into the tank union. If
it is glued, the Rollermat cannot not be disassembled.
Alternatively a 40 mm hose fitting can be pressed into the tank union
and a hose may be directed to the pond or aquarium.
In any case, the water must flow freely away from the outlet. Neither a
PVC pipe nor a flexible hose may be directed higher than the outlet of
the Rollermat.
Overflow
The emergency overflow is a 25 mm tank union. Here, you can press in a 25 mm
PVC pipe. From here the pipe is directed downwards in a free flow pipe.
Alternatively a 25 mm hose connection can be pressed into the tank union and a
hose can be directed to the pond or aquarium.
6.
Technical data
Power supply motor
12V, 50/60Hz , 4 Watts
Transformer
230V/50 Hz
Water inlet
D 40 glue connection, 1 ¾“ thread
Water outlet
D 40 glue connection, 1 ¾“ thread
overflow
D 25 glue connection, 1 “ thread
Width of the fleece roll
15 cm
Maximum water level, if placed
in a filter sump
12,5 cm above the bottom of the Rollermat
Dimensions (L x W x H)
42 x 25 x 45 cm
7.
Accessories: Spare fleece rolls
Article number: 3051100171 spare roll Aquarium “Fine“, 40g/m², 45m long
Article number: 3051100172 spare roll Pond “Standard“, 20g/m², 90m long
