Thecus Y.E.S. Box N2100, Руководство пользователя

Страница: 31 / 101

27
Note:
- Only use Jumbo Frame settings when operating in a Gigabit environment
where all other clients with Jumbo Frame Setting enabled.
Warning:
- Most Fast Ethernet (10/100) Switches / Routers do not support Jumbo
Frame and you will not be able to connect to your YES Box N2100 after
Jumbo Frame is turned on. If this happens, turn off the YES Box N2100.
Then, power on the YES Box N2100 and immediately press and hold the
Reset button on the back for 10 seconds. This will reset your network
settings, password, and turn off Jumbo Frame Support.
- LAN 1 and LAN 2 have to be on different LAN segments, e.g. 192.168.1.x
for LAN 1and 192.168.2.x for LAN 2.
DHCP Server Configuration
The YES Box N2100 supports a DHCP Server on second network interface.
DHCP Server Enable/Disable DHCP server on LAN 2.
Start IP
Specifies the starting IP address available to be leased.
End IP Specifies the end IP address available to be leased.
DNS Server Displays the Domain Name Service (DNS) server IP address.
Note:
- LAN 2 will use the DNS server specified in the LAN 1 configuration.