Thecus N8800SAS Скачать руководство пользователя страница 31

Страница: 31 / 150

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade

screen appears.

Follow the steps below to upgrade your firmware:

Use the Browse button

to find the firmware file.

Press Apply.

The beeper beeps and the Busy LED blinks until the upgrade is complete.

• Downgrading firmware is not permitted.

• Check Thecus website for the latest firmware release and release notes.

• The beeper only beeps if it is enabled in the System Notification menu.

NOTE

Do not turns off the system during the firmware upgrade process.
This will lead to a catastrophic result that may render the system inoperable.

WARNING

UPS Setting

The N8800SAS can also support various uninterruptible power supply units via

either “Serial” or “USB” interface, providing extra data security and accessibility in

the case of a power failure.

From the Status menu, choose the UPS item and the UPS Setting screen appears.

Make any changes you wish, and press Apply to confirm changes.

Содержание N8800SAS























































































































































Результаты поиска

Содержание N8800SAS

Отзывы:

Бренды по названию

Популярные бренды

Thecus N8800SAS, Руководство пользователя

Результаты поиска

Содержание N8800SAS

Отзывы:

Бренды по названию

Популярные бренды