KNX devices used in the case
Manual for the training case KNX
23
Selecting functions
Press the right/left arrow button.
A function is selected (switching on/off, dimming, blinds, function, move 0-
255, percent list, floating point 2 byte, floating point 4 byte, HVAC, scenes,
colour temperature, RGB, RGBW, XY colour, sequence, actual temperature).
Further settings in the functions
Press buttons up/down.
Operating the selected functions. The LEDs light up to confirm.
Favourites
If more than one function or the room temperature controller (RTC) is activated,
up to three functions can be selected as favourites A, B, C. This allows the three
most frequently required functions to be called up directly one after the other.
Parameters
Long button push
Activate room
temperature controller
Favourite A
Left
Right
yes
F1..F20
Display RTC
Jump between favourites
yes
RTC
Jump between favourites
no
F1..F20
Jump between favourites
Room temperature controller (RTC) function
If the room temperature controller is selected, the measured actual temperature
is displayed in this level. Depending on the configuration in the ETS parameters,
the left/right buttons can be used to go to the settings of setpoint temperature,
operating mode, fan stage, etc.
If required, the respective setting can be changed with the up/down buttons.
Operation via iONplay app
The iON 108 KNX room controller can be controlled via Bluetooth using the
iONplay app. The smartphone or tablet will be connected to the room controller
via the integrated Bluetooth module. The duration of pairing can be set in-
dividually.
Up to 30 room controllers can be managed via the app. The app visualises
and controls up to 20 functions.
The app control of the iON 108 KNX room controller is especially suitable for
living rooms, meeting rooms or hotels. When used in a hotel, the pairing is
automatically terminated after an adjustable period.
