1
thePiccola P360-100 DE WH
2090200
307146 03
Presence detector
EN
1. Basic safety information
Danger of death through electric shock or fire!
¾
¾
Installation should only be carried out by a
qualified electrician!
WARNING
•
The device conforms with EN 60669-2-1 if correctly
installed
2. Proper use
•
Presence detector for automatic lighting control depen-
dent on presence and brightness
•
Suitable for ceiling installation (false ceilings)
•
Suitable for small rooms, corridors, toilets, etc.
Disposal
¾
Dispose of the device in an environmentally sound manner
(electronic waste)
3. Device description
Sensor unit
red LED
Power supply unit
2 potentiometers for setting
the time delay (TIME) and
the brightness switching
value (LUX)
4. Installation and connection
Installing the presence detector
L
Installation height: 2–4 m
L
Cable length: 45 cm
L
Presence detector requires clear line of sight to people
¾
Disconnect power source
¾
Create a ceiling opening of Ø 34–36 mm
¾
Connect power supply unit according to the wiring diagram
¾
Make settings at the potentiometers
¾
Push the power supply unit through the ceiling opening
and attach the sensor with tensioned springs in the ceiling
Ø 34-36 mm
6–8 mm
max. 1 x 2,5 mm
2
Connecting the presence detector
Danger of death through electric shock or fire!
¾
¾
Installation should only be carried out by a
qualified electrician!
WARNING
¾
Disconnect power source
¾
Ensure device cannot be switched on
¾
Check absence of voltage
¾
Earth and bypass
¾
Cover or shield any adjacent live components
The warm-up phase takes approx. 1 min. The LED is perma-
nently red.
