Technical data
Nominal voltage:
230–240 V~, +10 %/-15 %
Frequency:
50–60 Hz
Gap:
<3 mm
Power consumption:
type 3 VA (SELEKTA 171 top2 RC),
type 6 VA (SELEKTA 172 top2)
Contact material:
AgSnO
2
Switch output:
phase-independent
(zero-cross switching)
Contact:
two way switch
Switching capacity:
16 A/250 V~ cos
ϕ
= 1
Switching capacity:
10 A/250 V~ cos
ϕ
= 0.6
Switching capacity min.: 10 mA/230 V AC
100 mA/12 V AC/DC
Glow lamp load:
2600 W
Halogen lamp load:
2600 W
Fluorescent lamps (VVG – low-loss series devices):
uncorrected:
2300 VA
Series corrected:
2300 VA
parallel-corrected:
730 VA (80 µF)
Lead-lag circuit (duo): 1000 VA
Fluorescent lamps (EVG – Electronic series devices):
650 VA
Mercury and sodium vapour lamps:
parallel-corrected: 730 VA (80 µF)
Mercury and sodium vapour lamps:
parallel-corrected:
730 VA (80 µF)
Compact fluorescent tubes (EVG): 22x7 W, 18x11 W, 16x15 W,
16x20 W, 14x23 W
Permissible ambient temperature: –30 °C ... +55 °C
Protection class:
II in accordance
appropriate installation
Protection rating:
IP 20 in accordance with
EN 60529
Pollution degree:
2
Service address/Hotline
Theben AG
Hohenbergstr. 32
72401 Haigerloch
GERMANY
Tel49 (0) 74 74 6 92 0
Fax: +49 (0) 74 74 6 92 150
The current OBELISK top2 PC software (with time zone
map) and the online version of the operating manual are
available at
www.theben.de
20
Tel49 (0) 74 74 6 92 369
Fax +49 (0) 74 74 6 92 207
[email protected]
Addresses, telephone numbers etc.
www.theben.de
