Switch actuators RM 4 H, RM 8 H
4.5
General parameters
4.5.1
General
Designation
Values
Description
Device type
RM 4 H
4-channel device FIX1
RM 8 H
8-channel device FIX2
Function of the
manual button
applies for 24 hours or
until reset via object
blocked
applies until reset via
object
applies for 30 minutes
or until reset via object
applies for 1 hour or
until reset via object
applies for 2 hours or
until reset via object
applies for 4 hours or
until reset via object
applies for 8 hours or
until reset via object
applies for 12 hours or
until reset via object
Determines how long the device works manually and
how this is ended.
In manual mode, the channels can only be switched
on and off via the buttons on the device.
See also: Object_78
Manual operation
of the channels
enabled
The channels can be operated via the buttons on the
device.
blocked
No manual operation, the buttons on the device are
blocked.
Sending collective
feedback
no
No collective feedback, object is unavailable.
report as inactive
Object value can be requested.
only at change
Sends whenever a channel status changes.
cyclically and at change
Sends cyclically and with status changes
See appendix: Collective feedback
Relay switch
delay
This parameter sets the minimum delay between
switching on 2 relays if several are activated at the
same time.
The shortest delay is achieved by using the
Central
switching
object.
When switching on via individual telegrams (1
telegram per channel), the bus running times and the
sequential processing of commands cause an
additional delay.
This can help avoid high current peaks when devices
are switched on simultaneously (e.g. with a number of
lighting strips).
