Connect USB/GSM modem
In the
SETTINGS
menu the additional sub-menu
PIN CODE
appears.
To protect the system, enter the four-digit code
of the SIM card.
Operation via SMS
When you connect a USB/GSM modem to the OT-Box
RAMSES top2 OT, the desired temperature/operating mode
can be set via mobile phone.
1. Room-dependent control
To change the set point value, PIN number and
temperature via SMS send to the USB/GSM modem:
e.g.
PIN:1234
Set:21.0
(note format!!)
The USB/GSM modem sends an SMS with:
PIN:Ok Set:21.0 Temp:19.0
To query the current temperature and settings,
send the PIN number to the USB/GSM modem:
e.g.
PIN:1234
The USB/GSM modem sends an SMS with:
PIN: OK Set:21.0 Temp:19.0
Switch chimney sweep function on/off
Press button on the OT-Box RAMSES top2 OT x 1. The
LED lights up. The chimney sweep function ( pump,
for measurement of emissions by the chimney sweep) is on
(full load).
Press button again; the function is switched off. If not
switched off manually the chimney sweeping function ends
automatically after 30 mins.
In the RAMSES 850 top2 OT, the chimney sweeping function
can also be switched on and off in the SETTINGS – CHIMNEY
SWEEPING.
Operating hours counter
The values burner start and burner hours are determined in the
OT box and displayed on the RAMSES 850 top2 OT.
Press INFO button. The display shows
17
GB
BURNER
START / 10
0 00
BURNER
HOURS / 10
0 00
1
2
