IPsecure Interface KNX
Device technology
19
2.6
Operating controls
There are no operating controls located on the IPsecure Interface.
2.7
Display elements
Three indicator LEDs are located on the front of the device:
ON
LAN/LINK
Telegram
ON
•
The LED lights up a few seconds after the auxiliary voltage is connected.
•
After the supply voltage is connected, the LED initially lights up continuously.
After approx. 40 seconds, the LED starts flashing until the startup process is complete and
the LED lights up continuously again.
LAN/LINK
•
The LED lights up when the auxiliary voltage is present and the interface is connected to an Ethernet network.
•
The LED flashes when the device detects activity on the network, e.g. when data is exchanged.
Telegram
•
The LED lights up when the interface is connected to a TP network and the startup process is complete (see
"On" LED).
•
The LED flashes when the device detects activity on the KNX subline TP1 (twisted pair 1), e.g. when data is
exchanged.
