7
OPTIONS
MENU
u
OPERATING
HOUR
LCD
ILLUMINATION
u
u
u
LANGUAGE
PIN
FACTORY
SETTING
INFO
NO PIN
WITH PIN
CURRENT PIN
NEW PIN
00:00
Setting manual control or permanent switching
Manual control or permanent switching can be set via the
menu in MANUAL or (in the automatic display) by button
combination (see picture).
•
Manual control:
Reversing the channel status until the next automatic
or programmed switch.
•
Permanent switching:
As long as permanent switching (on or off) is activated,
the programmed switching times are ineffective.
Activating manual control
Briefly press both buttons simultaneously.
Activating permanent switching
Press both buttons simultaneously for 2 seconds.
Cancelling manual control/permanent switching
Press both buttons simultaneously.
Hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE
will appear in the display.
Example: Replace a lamp after 5,000 h.
Delete operating hours or set a higher value in Service
(e.g. 10,000 h).
Using Bluetooth OBELISK top3
All functions can also be transferred to the time switch
using the Bluetooth OBELISK top3 memory card (accessory
9070130).
Copy OBELISK → TIME SWITCH
This copies the switch programme and optionally all time
switch settings (e.g. time format, etc.) from the memory card
to the time switch.
Copy TIME SWITCH → OBELISK
Copies all switch programmes and settings from the
time switch to the memory card.
Starting OBELISK program
Takes over the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the time switch are re-activated.
u
u
u
u
u
OBELISK
COPY
OBELISK ->
TIME SWITCH
COPY TIME
SWITCH ->
OBELISK
RUN
OBELISK
CHECK
OBELISK
END
OVERWRITE
OK
u
BLUETOOTH
COPY ALL
DATA
COPY
PROGRAM
END
Connecting time switch, Bluetooth OBELISK top3
and smartphone (via app)
The devices in the top3 range can be programmed using an
app (for Android, iOS) on a mobile end device. Communication
takes place via Bluetooth OBELISK top3. Switch programmes
are transferred and direct switch commands are sent to the
device.
Download the OBELISK top3 app from the App Store or
Google Play Store.
L
Bluetooth connection only possible in automatic mode, not
in manual mode like OPTIONS, etc.
Open the app and activate using one of the 3 commands,
by pressing "Download" , "Manual command"
or
"Upload" .
▻
Device/device list appears on the display.
