3. operation
The unit has automatic input format detection and adjusts the output to match
the input. The unit is not equipped with scaling technology and will not change
the format of the signal in any way.
1. Connect unit to power and (if applicable) connect auxiliary equipment to
the converter’s AC outlet.
2. The unit will boot and LEDs may flash in a random sequence.
3. If no video input is detected, the Power/Signal LED will light up Red
4. As soon as a valid video signal is detected on the input connector, the Power/
Signal LED will turn Green and the Signal Type LEDs will indicate the detected
signal type (3G/HD/SD).
5. The output plugs become active immediately after a valid signal has
been detected.
TiPS :
3-segment LED level meters indicate visually the presence and state
of signal on the XLR analog audio outputs. The outputs are balanced
and provide profes4dBu level output.
The XLR plugs are mapped to SDI channels 1 and 2.
The HDMI output plug will also output the full 8 audio channels. No
need to choose between HDMI and XLR !
iMPoRTANT NoTiCE REGARdiNG HCdP
The HDMI output of a Blu-ray player or other HDMI devices may have HDCP
encryption intended for content protection. HDCP protection may be active
only for certain video files, depending on the device. The HDCP standard only
allows for HDCP encrypted material to be converted to another format if that
format also supports HDCP and the material is re-encrypted. The only interface
formats that support HDCP are HDMI, DVI, Display Port and UDI. SDI does not
support HDCP and therefore the conversion from HDMI with HDCP to SDI is
against the HDCP standard.
Circumventing HdCP is against US law
In order to convert from HDMI with HDCP to HD-SDI the HDCP encryption will
have to be removed. Removing HDCP and outputting the signal in a different
format that does not support HDCP is circumventing the copyright protection.
Circumventing any form of digital copy right protection is prevented by the
Digital Millennium Copyright Act (DMCA) and is against US law.
