Lay out parts for the vertical fin and rudder
VERTICAL STABILIZER AND
RUDDER ASSEMBLY
P.14
T he Wor ld M ode ls
T he Wor ld M ode ls
5.13
5.14
6.1
W15R
V3
V2
V1
Place V2 and V3 on flat surface and apply glue to glue them
together. Insert CA hinges to the vertical stabilizer hinge
grooves, install rudder and check alignment of rudder. Do
not apply glue to the CA hinges at this stage. Sand down
rough edges if necessary.
Use sand paper to remove rough edges of the wing
assembly.
Glue in W15R. Dry fit W16 flap and W17 aileron with the
hinges, do not apply glue at this stage.