Main Wing
P.3
1
Pre-glued
Aileron Servo
3
Make sure to glue securely. If not properly
glued, a failure in flight may occur.
Main Wing
2
Completed
Wing Joiner Ø6x26x145mm
Please dry fit wing joiner into left and right wing to make sure they fit with the proper
dihedral angle, mark the wing joiner if necessary. Apply epoxy glue to both sides of
all surfaces in contact. Use a stick to apply the glue to inner side of wing joiner sleeve,
and apply the glue to wing joiner before putting them together. Wing joiner not glued
properly will lead to wing failure and plane crash.
Left Wing
Ring
1.5mm
3x8x22mm
Plywood
