Vertical Fin & Rudder
6
Stabilizer & Elevator
5
P.4
Completed
Completed
C=C'
C
C
B
B’
B=B’
Temporary install the main wing, adjust leveling
of the stabilizer to make it as parallel to the main
wing as possible.
Pre-glued
Pre-glued
A
A
A'
A'
(Stabilizer)
(Main Wing)
Aileron Servos
4
Bottom View
PWA2x8mm
Screw
8
Clevis
1.5mm
PWA 2 x 8mm
1mm
PB2 x16mm
Pushrod
Ø
1.8x115mm
Pushrod
Ø
1.8x115mm
Tri-horn
M3x14mm(s)
Clevis
Fuel Tube
Ø
6x5mm
Fuel Tube
Ø
6x5mm
PB2x16mm
Screw
6
TWM PL8210010
CLEVIS WRENCH
Ø1mm pilot holes for The Wings Maker tri-horn are pre-drilled.
Please look for pin-hole marks at under side of control surfaces.
Remove coverings for all surfaces in contact before
applying A/B epoxy glue.
Remove coverings for all surfaces in contact before
applying A/B epoxy glue.
GA021SPO27821210
