The Wings Maker DF-032, Инструкция по эксплуатации

Страница: 6 / 12

P. 5
Ducted Fan Propulsion Unit with 28/31 Motor
5
Make sure rotating motor
casing is not in contact with
wirings or anything.
1
2 3
4 5
6
M3x6mm
PM2x5mm
7
Completed
4
d3xD7mm Washer
PM2.5x8mm Screw
4
Optional Parts
Ducted Fan
Propulsion Unit
with Motor PL6800010
& Outrunner 28 / 31 KM0283110
Plywood
4x10x35mm
Solder D5x30mm
HEAT SHRINK TUBE
Electric Wire
Insulation
Washer
d3xD7mm
PM2.5x8mm
Make sure TWM logo on ducted
fan stay on bottom of fuselage.
Center Line
Bottom
Electric Wire
Apply a drop of CA to each notch will hold the intake cone in place, pry the notch with screw
driver to remove the cone for impeller or motor replacement.
Plywood&Magnet “-” 11x12mm
Plywood&Magnet “+” Ø12mm
GM032SXMPO27851203