Electronic Diffuser User Manual
Electronic Diffuser
–
User Manual
–
ARDEDNNA
2019V1
The White Company
2 Television Centre, 101 Wood Lane, London, W12 7FR
CLEANING UP SPILLS:
If a spill happens due to tipping over or tilting the diffuser unit while there is water in the water tank,
water may enter the internal components of the diffuser, resulting in a malfunction. If a spill
happens, immediately perform the following procedures to drain the water inside.
1. Unplug the AC adaptor from the electrical outlet
Be sure to unplug the AC adaptor from the electrical outlet and turn off the diffuser before
performing any procedures. Never plug in/unplug the AC adaptor with wet hands.
2. Remove the AC adaptor plug from the DC jack
After removing the AC adaptor cord from the cable guide, remove the AC adaptor plug from the Dc
jack.
3. Remove the outer cover
Gently lift the outer ceramic cover from the diffuser, and then remove the lid.
* When removing/replacing the outer cover, always set the diffuser on a stable horizontal surface.
Do not tilt the diffuser unit at an angle.
* Water droplets will adhere to the inside of the outer cover. Accordingly, remove the cover in a
location not susceptible to water damage. Set down a towel or similar to catch water droplets.
Do not allow water to enter the air outlet.
4. Dispose of water in the tank
Always tilt the diffuser unit in the direction of the water draining mark as indicated to pour out
water remaining in the water tank. Never tilt the diffuser toward the air outlet when pouring out
water. If water enters through the air outlet, it may cause a malfunction.
5. Dry the diffuser
Lightly shake the diffuser unit to allow water to pour out of the bottom water outlet. Allow the
diffuser to dry thoroughly. Allow 24 hours for the diffuser to dry. Never use a hair dryer or similar to
attempt to dry the diffuser. Allow the diffuser to air dry.
Water outlet
