The Wand Tonearm Master Unipivot Tonearm, Руководство пользователя

Страница: 2 / 10

The Wand dimensions & data;
Check the arm will fit on your turntable before you start.
Check what we have sent you ;
Supplied Picture Sent Check Supplied Picture Sent Check
Grease
(In a tube)
Below 1 M5 screws
(2 diff.)
C1 2
Cartridge Screws A2 2 M4 screw G3 1
Cartridge Spacer A4 2 Ortofon Balance D2 1
Protractor B1 1 Arm Lift Assembly E1 1
Spindle Assembly B4 1 Anti-skate weight E3 1
Hex Keys B4 3 Silicone Oil E5 1
Check what tools you need;
Tools you need
(Not supplied)
Check
Drill; 6mm (or ¼”)
Drill; 24-
25mm (1”)
Small flat bladed screwdriver
Pozi or Philips Screwdriver
Long nose pliers or tweezers
55 max
Record Surface
www.thewandtonearm.com
© Feb 2017 design build listen Ltd. v17
Maintenance; Re-grease the bearing tip occasionally with
the grease supplied. (Touch tip in grease as shown >)
Problem Solving
; If the arm is not performing well;

Check the stylus is clean.

Check the cartridge tracking weight.

Check the wires are not pushing the arm sideways.
Notes;

Don’t ship the turntable with the arm on the spindle.

Black and silver metal parts may be lightly oiled to
keep them looking good. (Do in humid climates)

With our continuous improvement program the parts
shown here may be slightly different from yours.
Data;

Weight =0.75kg (
0.8kg for 12in)

Effective mass of arm = 13.5g
(15g for 10.3in, 16g for 12in)

Warranty; 2 years (Note;
shipping cost to us is the
responsibility of the sender.)
40mm min
28 min
Ø50>
Ø23>
Stylus to Pivot 240mm
(262mm for 10.3in arm)
(308.8mm for 12in arm)
Pivot to TT Spindle 222mm
(246mm for 10.3in arm)
(295mm for 12in arm)
8
1
mm