14, 16
[STEREO IN]
RCA sockets for connecting stereo sources.
15, 17
[REC OUT]
Line outputs with RCA sockets for connecting recording devices.
18, 19
[L]
1/4" phone input to connect the left signal of a stereo line level audio
source (keyboards, drum modules etc.).
With mono signals in channel 11/12, use this input with the
[R]
socket
unused so the signal is present at both sum channels.
20
[PAD]
Switch for lowering the input sensitivity with particularly powerful signals.
21
[LINE | USB]
Switch for selecting the analogue line input R / L or the USB input.
22, 23
[R]
1/4" phone input to connect the right signal of a stereo line level audio
source (keyboards, drum modules etc.).
24, 25
[EQ]
,
[LOW]
2-band EQ for treble
[HIGH]
and bass
[LOW]
.
26
[AUX]
Rotary control to adjust the signal portion to be sent to the
[AUX SEND]
output to e.g. create a monitor mix.
27
[FX]
Rotary control to adjust the signal portion, which is sent to the internal
effects section as well as to the
[FX SEND]
output.
28
[BAL]
Rotary control to arrange the channel signal within the stereo balance.
29
[PFL]
switch
With this switch pressed, the channel signal is unaffectedly by the setting
of the channel fader and the internal effects section and present at the out-
puts
[PHONES]
and
[CR OUT]
to adapt the values). The switch does not
affect the signal at the outputs
[MAIN OUTPUT]
and
[REC OUT]
.
30
[PRE / POST]
When this switch is pressed, the signal portion set with the
[AUX]
control is
not affected by the channel fader (
[PRE]
). When the switch is not pressed,
the AUX signal is not subject to the channel fader (
[POST]
).
31
[PFL]
LED
This LED lights on activated PFL function.
Stereo channel strip
Connections and controls
xmix 1002 FX USB
11
