The t.mix Mix 1832 FX, Руководство пользователя

Страница: 12 / 24

Mix 1832 FX
12
www.thomann.de
AUX RETURNS SOLO button
29
The function of AUX RETURN SOLO is like the channel SOLO button. Engaging this switch signal from AUX
RETURN (1-4) will be sent to CTRL OUT, PHONES outputs and Meters display. Pressing this button, the LED
next to the button will light. This feature is affected by SOLO mode button (n.35).
SUBGROUPS ASSIGN TO MAIN MIX
30
Through these switches, you can operate the subgroup faders as master controls assigning the subgroup
signals to MAIN MIX. Engage the LEFT switch to send the corresponding subgroup signal to MAIN MIX L, and
the RIGHT switch for MAIN MIX R. When engaging both switches, the signal will be sent to L/R of MAIN MIX.
SUBGROUPS fader
31
These faders are used to control the levels of the signal send to the SUBGROUPS OUT, the adjustable range
goes from –
∞
to +10 dB. Any channel that is assigned to the subgroups, not muted and not turned down will
be assigned to the SUBGROUPS OUT.
MAIN MIX LEVEL fader
32
This fader sets the amount of signal send either to the main mix output and to the Tape output.
OUTPUT LEVEL LED meter
33
The stereo 12-segment LED meter shows the level of signal sent to ctrl room and phones outputs.
2TK TO MIX button
34
Engaging this switch allows you to combine the 2-track output with the main mix. In other words, it feeds the
2-track In signals into main L/R output.
SOLO MODE button
35
This button provides two modes: up for PFL (pre-fader-listen) mode, down for AFL (after-fader-listen) mode.
After the Level control, otherwise, release the button will output the soloed signal before the level control.
NOTE: The SOLO function will never affect sound output to main recording output, and also can‘t be affected
by channel‘s MUTE switch.
EQ switch
36
Engage this button to include the stereo graphic EQ in ST OUT output circuit. It can be used to modify the
overall sound character of your mix. If you release the button, the stereo graphic EQ will be bypassed.
STEREO GRAPHIC EQ
37
36 37
-15
0
+15
63 500 250 125 2K 1K
-15
0
+15
16K 8K 4K
EQ OFF
EQ ON
MAIN GRAPHIC EQ
Each one of these faders will boost or attenuate (+/-15 dB) the se-
lected frequency at a preset bandwidth. When all the faders are in
center position, the output of the equalizer is flat response.
DSP SECTION
There is a powerful 24-bit/256 preset multi-effects included in your Mix 1832 FX. Effects include reverbs, cho-
rus, flanger, delay and combinations of the above.